Sabine FBX-SOLO SL820 Digital Feedback Eliminator with 1/4" I/O

Single channel feedback elimination for acoustic electric guitars.

Let's make this loud and clear: You want more gain? Increased clarity? Automatic feedback control? Want to save some money? Sabine has the answer: The FBX SOLO Feedback Eliminator, a miniature version of the award winning FBX 1020P Feedback Exterminator. One SOLO controls feedback on one microphone or instrument you decide which inputs get precision, automatic feedback control and maximum gain, from one channel to all your channels. Features of the SOLOs include increased headroom, a programmable noise gate, & switchable input/output levels for more versatility.

The FBX SOLO SL820 provides 1/4" I/O for use with acoustic electric guitars, which tend to be prone to feedback at high stage levels. The SL820 lets you get the most out of your sound while performing at hotter levels.

The FBX SOLO targets feedback without taking a big chunk out of your sound. Digital FBX filters are 10 times narrower than graphic EQ filters. You get back over 90% of the power you lose with a graphic EQ.

Like all the FBX Feedback Exterminators, the FBX SOLO does what no other audio product can do: it automatically detects and eliminates feedback while leaving the sound crystal clear. The patented algorithm distinguishes music from feedback so it works even during the program, not just at setup time.

If you use your 31 band EQ just to shape your sound and let your FBX control feedback, you should expect up to 9 dB more gain and a dramatic improvement in the sound quality. Why? When you pull down a graphic EQ slider to chase feedback, you also pull out a big chunk of your sound. FBX constant Q filters are 10 times narrower than graphic EQ filters. Narrow filters mean more gain and more clarity. It's that simple.

The perfect solution for wireless mics
Using the FBX SOLO with a wireless mic, you'll be able to move freely without worrying about feedback. Patch it in your monitors and they'll be so loud you may have to turn them down. Get the volume you want with your acoustic/electric instrument or harmonica mic and keep that rich tone. And the built in noise gate provides the control you need in multi mic locations like conference rooms and courthouses. Wherever you have an open microphone, the FBX is the most effective and least expensive way to make a dramatic improvement in your sound system.

How It Works:
Precisely detects feedback frequency Places super narrow (1/10 octave) digital filter directly on feedback Sets filter just deep enough to remove feedback

What You Get:
More gain... for the first time you'll have to turn down the monitors! Increased clarity and intelligibility narrow filters get the feedback and leave your sound untouched Automatic feedback control in setup and during the performance Targeted feedback control aim the FBX where you need it most

Which SOLO for you?
This SL820 features 1/4" TRS I/O connectors, unbalanced >1 meg Ohm input impedance, +20 dBV maximum input/output level at lowest gain, a 0 to +35 dB (high in), +30 to +65 dB (low in) gain range (with line out selected), and a performance digital bypass.

The SM820, by contrast, features 3 PIN XLR I/O connectors (2 high balanced), 1 K Ohm nominal input impedance, 10 dBV maximum input/output level at lowest gain, a 15 to +20dB gain range at high output, and 48V switch selectable phantom power.

The FBX SOLO a fast, accurate, and affordable way to automatically remove feedback and make your sound loud and clear.

Features Mixer insert points, powered mixer patch points, acoustic/electric guitars and guitar amps, and high impedance mics Input/output level switches allow any combination of ins & outs Switchable filter widths: 1/10 or 1/5 octave

Sabine FBX SOLO SL820 Digital Feedback Eliminator with 1/4" I/O Specifications:

• Filters
• Eight independent digital notch filters controlled automatically from 40Hz to 20 KHz
• Filter width: 1/10 octave, typical, or 1/5 oct. selectable, constant "Q" (Below approximately 200 Hz the feedback filters become slightly wider to increase the feedback and rumble capture speed at these low frequencies.)
• Filter depth: DSP controlled, variable to 40dB
• Resolution: 1/50 octave
• Time required to find and eliminate feedback: 0.4 seconds, typical @ 1KHz
• Total number of combined filters active: User selectable, from 1 to 8
• Number of Dynamic vs. Fixed filters: User selectable
• Last configuration stored in memory
  
  Input/output
• I/O Connectors: 1/4" TRS; tip=input, ring=output, sleeve=ground
• Input Impedance: Unbalanced >1 meg Ohm
• Output Impedance: Unbalanced 10 Ohms nominal; Maximum load 2K Ohms
• Maximum Input/Output Level at lowest gain: +20 dBV
• Gain Range (with line out selected): 0 to +35 dB (high in), +30 to +65 dB (low in)
• Input to Output Gain @ unity setting: +/ 0.5 dBV
• Bypass: Digital performance (Tests performed using an Audio Precision System One model 322 or equal.)
• Frequency Response: < +0.25 dB, 20Hz to 20 KHz
• SNR: >94 dB typical
• THD: <0.01% @ 1KHz @ +15 dBV
• Dynamic Range: >100dB
  
  Noise gate
• Attack Time: Fixed (400 mS)
• Threshold: Selectable ( 24, 36, 48, 60 dB)
  
  Power supply
• 8 20VDC @ 400 mA
  
  Dimensions
• 1 U height, 1/6 RU width; 2.78 x 1.65 x 5.5 in. (6.95 x 4.13 x 13.75 cm)
  
  Weight
• 9.0 oz. (0.26 kg)
  
  Option
• SL6RACK Rack Tray (holds up to six units)

Sabine FBX SOLO SL820 Digital Feedback Eliminator with 1/4" I/O Features:

• Mixer insert points, powered mixer patch points, acoustic/electric guitars and guitar amps, and high impedance mics
• Input/output level switches allow any combination of ins and outs
• Switchable filter widths: 1/10 or 1/5 octave

Save your acoustic electric performances from unexpected, vibe killing feedback. Order an SL820 and play your heart out.