dbx DriveRack PX Powered Speaker Optimizer - Scratch 'n' Dent

Everything you need to get the most out of your stereo powered speaker system.

Powered speakers are beautiful things. Everything you need bundled into simple, tidy, portable packages. Just grab 'em and go, right? Well, you may think your powered speaker system is complete, but you're missing half the picture. DriveRack PX is the other half. With the PX, dbx has created a processor specifically tailored for powered speakers.

Utilizing dbx's highly acclaimed DriveRack technology, the PX picks up where your powered speakers leave off. The DriveRack PX Powered Speaker Optimizer has everything you need to get the most out of your stereo powered speaker system. It even includes stereo or mono subwoofer support. With the included dbx M2 measurement mic, Auto EQ corrects for audible deficiencies in the room environment. Dbx's patented Advanced Feedback Suppression (AFSTM) kills nasty feedback, allowing problem free operation at higher sound levels, while dbx's patented Subharmonic Synthesizer extends bass response for enhanced bottom end.

With all that, you also get classic dbx compression and the protection offered by dbx's graceful PeakStopPlus limiting. Your ears, your audience, and your powered speakers will forever thank you. In spite of all that sophistication, rest assured dbx won't overcomplicate the simplicity of your rig. Dbx's exclusive Setup, Auto EQ, AFS Wizards, and out of the box support for a host of JBL and other popular powered speakers, make setup a snap. Louder, cleaner, better sound than you thought possible from your powered speakers.

dbx DriveRack PX Powered Speaker Optimizer Scratch 'n' Dent Specifications:

• Analog Inputs
• Number of Inputs: 2 (Stereo) Line inputs
• 1 RTA Mic input
• Connectors: 2 Female XLR line inputs
• 1 XLR RTA Mic input
• Type: Electronically balanced, RF filtered
• Impedance: >40k_
• Max Input Line level: +20dBu
• Input CMRR: >45dB
• RTA Mic Phantom Voltage: +15VDC
• RTA Mic EIN: < 110dBu, 22Hz 22kHz, 150_
  
  Analog Outputs
• Number of Outputs: 2 (Stereo) Line outputs
• 2 Sub outputs (mono or stereo)
• Connectors: 2 Male XLR XLR line outputs
• 2 Male XLR Sub outputs
• Type: Electronically balanced, RF filtered
• Impedance: 120 _
• Max Output Level: +20dBu
  
  A/D Performance
• Type: dbx Type IVTM conversion system
• Dynamic Range: 110dB A weighted
• 107dB unweighted
• Type IV dynamic range: 123dB with transient material, A weighted, 22kHz BW
• 121dB with transient material, unweighted, 22kHz BW
• 115dB typical with program material, A weighted, 22kHz BW
• Sample Rate: 48kHz
  
  D/A Performance
• Dynamic Range: 112dB A weighted
• 110dB unweighted
  
  System Performance
• Dynamic Range: 110dB A unweighted,
• 107dB unweighted,
• THD+N: 0.002% typical at +4dBu, 1kHz, 0dB input gain
• Frequency Response: 20Hz 20kHz, +/ 0.5dB
• Interchannel Crosstalk: < 110dB, 120dB typical
• Crosstalk input to output: < 100dB

dbx DriveRack PX Powered Speaker Optimizer Scratch 'n' Dent Features:

• Stereo feedback elimination with 12 feedback notch filters
• Dual 28 band graphic EQ
• Classic dbx Compressor
• 120A subharmonic synthesizer
• Stereo multi band parametric EQ
• Stereo PeakStopPlus limiters
• Pink noise generator
• Auto EQ with 28 band RTA
• JBL and other popular powered speakers included in Setup Wizard
• dbx M2 measurement mic and zippered pouch included
• Front panel RTA Mic XLR input with phantom power
• 25 user programs / 25 factory programs
• 2 channel XLR Input
• 2 channel XLR Output
• 2 channel XLR Sub Output
• 24 bit ADC/24 bit DAC, >110 dB dynamic range
• dbx Type IVTM conversion system
• Full graphic LCD display

Take total control of your sound easily. Order the PX with the assurance of our double guarantees!