dbx DriveRack PA Processor - Scratch 'n' Dent

A fully integrated system that gets the most from your PA.

The dbx DriveRack PA Processor will give you gig after gig of crisp, clean sound. Delivers auto EQ; RTA; dual 28 band graphic EQ; feedback elimination; sub harmonic synth; 2x3, 4, 5, or 6 crossover; limiter on the output stage; and presets matching the latest JBL speakers and Crown power amps. Wizard setup help.

The DriveRack PA provides state of the art signal processing, while using a simple and intuitive user interface. This goal has been achieved by offering 2 independent channels of processing power with a linkable 28 band graphic equalizer, industry standard dbx stereo compressor module, feedback eliminator and the 120A subharmonic synthesizer on the input, with a 6 channel output system that includes parametric EQs, and Peak Plus limiters (which are used to provide protection against speaker blowouts) and alignment delay. These features combined with the Wizard setup system represent a methodical design that is guaranteed to deliver optimal all inclusive processing in a completely scalable system.

dbx DriveRack PA Processor Scratch 'n' Dent Specifications:

• System Performance
• Dynamic Range: 110dB A weighted, >107 dB unweighted
• THD + N: 0.002% typical at +4dBu, 1kHz, 0dB input gain
• Frequency Response: 20Hz 20kHz, +/ 0.5dB
• Interchannel Crosstalk: >110dB min, 120dB typical
• Crosstalk input to output: >+100dB
• Delay: 10ms per channel (60 ms total)
  
  A/D Performance
• Type: dbx Type IV conversion system
• Dynamic Range: line 110dB A weighted; 107 dB unweighted
• Type IV dynamic range 123 dB with transient material, unweighted, 22kHz BW
• 121 dB with transient material, unweighted, 22kHz BW
• 115 dB typical with program material, A weighted, 22kHz BW
• Sample Rate: 48kHz
  
  D/A Performance
• Dynamic Range: 112 dB A weighted, 110dB unweighted
  
  Analog Inputs
• Number of Inputs: (2) Line inputs. (1) RTA Mic input
• Connectors: (2) Female XLR line inputs. XLR RTA Mic input
• Type: Electronically balanced/RF filtered
• Impedance: >40k ohm
• Max Input line level: +20dBu
• CMRR: >45dB
• RTA Mic Phantom Voltage: +15VDC
• RTA Mic EIN: < 110dBu, 22Hz 22kHz, 150 ohm
  
  Analog Outputs
• Number of Outputs: 6
• Connectors: Male XLR
• Type: Electronically balanced, RF filtered
• Impedance: 120ohms
• Max Output Level: +20dBu

dbx DriveRack PA Processor Scratch 'n' Dent Features:

• Stereo Feedback Elimination with 12 feedback notch filters
• Dual 28 band Graphic EQ
• Classic dbx Compressor
• 120A Sub harmonic Synthesizer
• 2x3, 2x4, 2x5, 2x6 Crossover Configurations
• Stereo Multiband Parametric EQ
• Stereo Output Limiters
• Alignment Delay
• Pink Noise Generator
• Auto EQ with 28 band RTA
• JBL Speaker and Crown Power Amp Tunings with Setup Wizard
• 25 User Programs/25 Factory Programs
• 2 Channel XLR Input and 6 Channel XLR Output
• 24 Bit ADC/24 Bit DAC, >110 dB Dynamic Range
• Full Graphic LCD Display

It's just one unit. But it does so much. Order yours now and take advantage of these incredible savings!