Peavey Penta Half-Stack

The Peavey Penta Half Stack includes the Penta tube guitar amp head and Penta 412 speaker cabinet.

Single channel Penta tube amp head with selectable EQ/gain voicings gives you 5 different personalities to choose from. 4 matched EL34 tubes and 4 12AX7 tubes, with ceramic tube sockets, large custom transformers, and superior components give you the vintage rock tones you're searching for. Provides 140W RMS into 16, 8, or 4 ohms.

The Penta Head's 5 classic gain voicings use all analog Pentatone circuitry and are accessible via a rotary knob and identified by corresponding icons. All you need to do is plug in and play.

Voices:
• Star reveals a classic British "plexi" voicing
• Bull produces a modified British voicing with tons of added gain and a tighter low end
• Tree lays on a thicker British voicing with a loose attack and slightly more gain
• Mudflap Girl is a super high gain voicing with a more responsive EQ and power amp section (think Triple XXX)
• Cactus is, simply put, Texas fat and clean

The Peavey Penta 412 cabinet is specially voiced for use with the Penta Head. 4 12" rear mounted speakers, 11 ply birch baffle, and 1/2" poplar sides with a striking brown weave grille cloth.

Peavey Penta Half Stack Specifications:

• Penta tube guitar amp head
  
  Rated Power and Load:
• 140W RMS into 16, 8, & 4 ohms
• External jacks are paralleled 4 ohms minimum
  
  The following specs are measured @ 1kHz with the controls preset as follows:
• Bass, Treble & Mid EQ @ 5
• Master Volume @ 1O
• (Nominal levels are with Pre Gain @ 5. Minimum levels are with Pre Gain @ 10.)
  
  Preamp Input Section (1st channel):
• Nominal Input Level: 0dBV, 1V RMS
• Minimum Input Level: 20dBV, 100 mV RMS
• Maximum Input Level: 6dBV, 2V RMS
  
  System Signal to Noise:
• (1st channel 20Hz to 20kHz unweighted)
• (Pre Gain set halfway)
• Greater than 80dB below rated power
  
  Equalization:
• Custom Bass, Mid, & Treble passive type EQ for each mode
  
  Power consumption:
• Domestic: 300 watts, 60 Hz, 120 VAC
• Export: 300 watts, 50/60 Hz, 220 230/240 VAC
  
  Dimensions:
• 17.875"H x 21.375"W x 10.25"D
• (45.40 cm x 54.29 cm x 26.03 cm)
  
  Weight:
• 57.8 lbs. (26.24 kg) with power supply
  
  Penta 412 cabinet
  
  Dimensions
• 30"W x 32"H x 14.125"D (Unpacked)
• 32.5"W x 35.5"H x 17"D (Packed)
  
  Weight
• 90.5 lbs. (Unpacked)
• 102 lbs. (packed)

Peavey Penta Half Stack Features:

• Penta tube guitar amp head
  
  140W RMS into 16, 8, or 4 ohms
• 4 matched EL34 tubes and 4 12AX7 tubes
• DC powered preamp tube heaters
• Pentatone selects between 5 EQ/gain voicings
• Gain control
• 3 band passive EQ
• Master volume
• Presence control
• Ceramic tube sockets
• Custom USA transformers
• Ultrahigh quality components
  
  Penta 412 cabinet
  
  Specially voiced for use with the Penta amp head
• 11 ply birch baffle
• 1/2" poplar sides
• 4 12" rear mounted speakers
• Striking brown weave grille cloth

Not one but 5 tube tones at a price that can't be beat guaranteed!