Markbass F1 500W Bass Head

Surprisingly powerful yet tiny amp head.

The F1 is Markbass' lightest and smallest bass amp head to date, boasting an unbelievable power to weight ratio of more than 100 watts per pound. Its digital power amp gives it a super fast response and a crisp, clear, full sound that will convey every detail of your playing, instantly. It's 1/4" input jack works with both active and passive basses and allows you to EQ your sound with Low, Mid Low, High Low, and High control knobs, as well as Markbass' exclusive VLE (Vintage Loudspeaker Emulator) and VPF (Variable Pre shape Filter) filters, with separate Gain and Master volume controls. The rear panel has a balanced XLR out, Neutrik Speakon Combo jacks which work with either Speakon or 1/4" speaker cables, a tuner out, as well as Effect Send and Return 1/4" jacks to ensure you don't lose your main signal if a piece of your effects chain dies. There is also a ground lift switch to help eliminate hum. Despite being lightweight, the Markbass F1 bass head is made with a rigid 2mm thick aluminum chassis to ensure your investment can handle the rigors of the road.

Markbass F1 500W Bass Head Specifications:

• Power
• Input impedance: 500Kohm, max. voltage: 15 Vpp
• Effect Return impedance: 33Kohm, max. voltage: 25 Vpp
• Output Power: 300W RMS at 8 ohm, 500W RMS at 4 ohm
• Power Requirement: 100V; 120V; 230V; 240V; 50/60Hz
  
  Controls
• GAIN: 80dB to +25dB range
• GROUND LIFT: Switch on rear panel
• MASTER VOLUME
  
  Equalization
• LOW
• Center frequency: 40Hz; level ±16dB
• LOW MID
• Center frequency 360Hz, level ±16dB
• HIGH MID
• Center frequency 800Hz, level ±16dB
• HIGH
• 10kHz shelf; level ±16dB
• VPF (Variable Pre shape Filter)
• center frequency 380Hz (cut)
• VLE (Vintage Loudspeaker Emulator)
• frequency range 250Hz 20 kHz (cut)
  
  Outputs
• EFFECT SEND
• Unbalanced, max. voltage 20 Vpp (pre EQ)
• TUNER OUT
• Unbalanced, max. voltage 25 Vpp
• LINE OUT
• Balanced XLR, max. voltage 10 Vpp
• SPEAKER OUT
• Speakon, 1/4" x 2
  
  Other
• Dimensions: 10.87"(W) x 1.73"(H) or (1U) x 10.04"(D)
• Weight: 4.63 lbs.

Markbass F1 500W Bass Head Features:

• Digital amp bass head
• Provides 300W RMS at 8 ohms, 500W RMS at 4 ohms
• 1/4" input jack works with active or passive basses
• Gain and Master volume controls
• Clip warning light
• EQ includes controls for Low, Mid Frequency Low, High Frequency Low, and High
• VLE (Vintage Loudspeaker Emulator) and VPF (Variable Pre shape Filter) filters
• Neutrik Speakon Combo out jacks for use with 1/4" or Speakon speaker cables
• Balanced XLR out
• Ground lift switch to eliminate hum
• Tuner out sends unbalanced signal sent to a tuner, amp or recording equipment not needing a balanced signal
• Send and Return Effect ensures main signal continues even if something dies in your effects chain
• Dual sided fiberglass PC boards with lined perforations for high quality solder connections
• Surface mount components are silicon sealed to isolate vibrations
• Computer grade pre assembled ribbon connector cable harnesses and ribbons for noise free operation
• Integrated threaded posts for easy assembly/disassembly and added durability
• Rigid 2mm thick aluminium chassis for a durability on the road

It may be able to fit in your backpack, yet this small amp head will bring the heavy bass power you want in live settings. Order now.