Markbass CMD 103H 400W 3x10 Bass Combo Amp

Perfect for any bass, especially 5 and 6 stringers.

The Markbass CMD 103H is a bass combo amplifier that makes full use of its built in Little Mark II preamp's 400 watts. The Markbass CMD 103H blows out room rattling rhythms through three 10" B&C designed speakers. Great for any style bass playing, it's especially convenient for 5 and 6 string bassists who want an amplifier that can handle their low end without fear of distortion or other unwanted noises. The CMD 103H combo's preamp has a 4 band EQ and 2 exclusive filters to better hone your tone. Pump up the volume. The Markbass CMD 103H amp can handle it.

Markbass CMD 103H 400W 3x10 Bass Combo Amp Specifications:

• Speaker: 3 x 10"
• Tweeter: 1" compression driver with custom horn
• Bass reflex: rear
• Impedance: 6 ohms
• Sensitivity: 103 dB SPL
• Speaker power handling: 600W RMS (AES Standard)
• Amp output power: 500W at 4 ohm/300W at 8 ohm
• Frequency response: 40Hz to 20kHz
• Crossover Frequency: 3.5kHz
• Dimensions: 23.4"W x 27.5"H x 18.9"D
• Weight: 63.3 lbs.
  
  Little Mark II head
• Power
• Input impedance: 500Kohm, max. voltage: 15 Vpp
• Balanced Output (XLR): 22Kohm, max. voltage 25 Vpp
• Effect Return impedance: 22Kohm, max. voltage: 25 Vpp
• Output Power: 300W RMS at 8 ohm, 500W RMS at 4 ohm
• Power requirement: 100/120V; 230V; 240V; 50/60Hz
• Controls
• GAIN 80 dB to +23 dB range
• MASTER VOLUME
• GROUND LIFT: switch on rear panel
• Equalization
• LOW
• Center frequency: 40Hz; level ±16dB
• LOW MID
• Center frequency 360Hz, level ±16dB
• HIGH MID
• Center frequency 800Hz, level ±16dB
• HIGH
• 10kHz shelf; level ±16dB
• VPF (Variable Pre shape Filter)
• center frequency 380Hz (cut)
• VLE (Vintage Loudspeaker Emulator)
• frequency range 250Hz 20kHz (cut)
• Outputs
• EFFECT SEND
• Unbalanced, max. voltage 20 Vpp (pre EQ)
• TUNER OUT
• Unbalanced, max. voltage 25 Vpp
• LINE OUT
• Balanced XLR, max. voltage 10 Vpp
• SPEAKER OUT
• Speakon, 1/4"

Markbass CMD 103H 400W 3x10 Bass Combo Amp Features:

• Three 10" B&C woofers
• 1" compression driver with custom horn
• Great power to weight ratio
• Made of high grade, multi ply poplar
• Glued, screwed, and sealed internally with special compounds for maximum sound quality
• Protected corners
• Grill for protecting speakers
• Lightweight
  
  Little Mark II
• Provides 500W at 4 ohm or 300W at 8 ohm
• Gain and Master volume controls
• Clip warning light
• EQ includes controls for Low, Mid Frequency Low, High Frequency Low, and High
• VLE (Vintage Loudspeaker Emulator) and VPF (Variable Pre shape Filter) filters
• Ground lift switch to eliminate hum
• Tuner out sends unbalanced signal sent to a tuner, amp or recording equipment not needing a balanced signal
• Send and Return Effect ensures main signal continues even if something dies in your effects chain

Don't be afraid to bring the noise cause this one's made to handle the big boys. Order one today.